4L Classicliquid® Primer
Classicliquid Primer is a single component polyurethane primer suitable for most substrates.
It can be used on both porous and non-porous substrates and must be used prior to the application of Classic Liquid waterproof coating.
It is characterised by its very low viscosity and balanced curing speed which results in excellent wetting, penetration and paint over time on all substrates. Additionally, it can be used on dry concrete, not only as a primer but also as a low cost sealing solution onto that substrate.
Recommended for Use as a Primer Over:
• Built up felt
• Ceramic tiles
• OSB Decking and all other timber surfaces
• Recovery Boards
• GRP Metal
Coverage Rates Approximately 0.1-0.3 ltrs/m2 dependant on the porosity of the substrate.
For semi-porous substrates the coverage rate is typically 0.2ltrs/m2 .