Grabfast The Roofing Solution
Grabfast has been specifically designed to bond EPDM Rubber and insulation to a wide spectrum of substrates. It offers the user a fast, reliable and portable alternative to traditional methods whilst leaving an excellent bond that is both waterproof and non-flammable.
The bulk aerosol system reduces costs by saving application time, with no wastage at all.
- Portable system
- Ease of application
- Self contained and maintenance free
- Excellent bond strength
- Ready to bond within minutes
- Non flammable
- Shelf Life 1 year
If you want to see the Grabfast in action, we offer a Grabfast demo upon request, here at the shop.
"I've completed an EPDM Rubber course and have since converted to the Grabfast, I don't know how I managed before and I'm busier than ever! It's all good, with help from The Roof Shop." Carl Peters, The Roof Shop approved contractor
Chemical Name: Sprayable Contact adhesive
Specific Gravity: 1.19 + 0.02
Coverage: 15 sqm per kg
Shear Adhesion: 85psi
Shelf Life: 1 Year
Temperate Stability: 120˚C
All surfaces to be bonded should be dry, clean, grease and dust free. Hold the Grabfast spray gun parallel to the substrate and apply an even coat of adhesive across it, a webbing effect should be created. Do not allow the adhesive to puddle or concentrate in one area. In order to prevent this from happening the EDPM spray gun is fully adjustable by turning the wheel located behind the trigger. The wider the spray pattern being applied the further away the nozzle should be held. The tip of the spray gun should always be kept clean.
It is recommended that you keep a spare tip, one in use and one cleaning, additional tips are available from your local representative.
It is important to remember that Grabfast is a EPDM contact adhesive and forms its bond by sticking to itself hence there must be sufficient adhesive on both substrates to allow this to happen. On insulation the coverage should be approximately 80%. It should be noted that it can be applied directly onto the insulation. On EPDM rubber the user should ensure that 100% coverage is achieved.
The two surfaces are ready to bond when the adhesive is dry to the touch with no transference to the fingers; once they are brought together a roller should be used to achieve maximum performance. It is the users responsibility to ensure the suitability of Grabfast for the substrates that are to be bonded. If you are unsure please do not hesitate to contact The Roof Shop Team, who are always happy to help.
For a Grabfast demo please give us a call on 01452 713 400 or email email@example.com for more information or your no-obligation quotation.